DRAKE 4000 series II Podręcznik Użytkownika Pobierz pdf (Strona 132)

Panel User Guide Issue 1.4 4000 Digital Series II

Page 102 STA0380

Pressing the Main Volume Control invokes loudspeaker cut. The green LED above the Reply Key is

illuminated while the loudspeaker is cut.

4.9.11 Reply Key

This DAK is designated to respond to any unscheduled calls. The green LCD indicator on the REPLY

Key only flashes to signal the presence of an unscheduled call, when a DAK is unavailable, (i.e. to

indicate that the call can only be responded to by the Reply Key).

The Reply Key can only respond to the call mnemonic displayed. All other incoming calls are placed in

a queue and have to be accessed in turn. The latest call is placed at the front of the queue. The maximum

number of calls in this queue is ten.

If the DAK is used to respond to a call, then the Reply Key displays the next call in the queue.

4.9.12 Direct Access Key (DAK)

The 4000 Series LCD Key Panels have Direct Access Key (DAK) pushbuttons. These DAKs are used

to make Listen and/or Talk routes to and from the Control Panel or other audio connections. The DAK

can also be assigned to trigger a control event from either the Control Panel or the matrix.

The pushbutton operation is selectable from a range of options and set via the Configuration and Master

Assignment Programming System (CMAPSi) workstation software. The pushbutton actions include:

Table 35: PD4222R DAK Operation

Latch When a DAK is pressed and released, it latches in the

engaged position. Pressing the DAK again disengages it.

Non-Latch When a DAK is pressed and held depressed, it automatically

disengages when released.

Latch/Non-Latch A combination of the two above such that a quick press will

latch the button and a slow press will be the non-latch action.

Dual Talk/Listen When a DAK is momentary pressed, it makes a latched Lis-

ten Route. The DAK can then be pressed and held to make a

Talk Route at the same time, and released to unmake the

Talk Route. A second momentary press disengages the DAK

and the latched Listen Route.

Interlock Group A DAK can be assigned to any one of eight interlock groups

A - H. Within an interlock group only one DAK may be active

at any one time. If a DAK in a given group is pressed whilst

another DAK in the same group is already active the cur-

rently active key is deactivated and the key pressed

becomes active.

1 2 ... 127 128 129 130 131 132 133 134 135 136 137 ... 235 236

Brak uwag

DRAKE 4000 series II Podręcznik Użytkownika Strona 132